Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ducati ST2 wheel encoder.
#1
[attachment=69][attachment=69][attachment=69][attachment=69][attachment=69]Need a wheel encoder for Ducati ST2, specs:
944 cc.
4 stroke.
2 cillinder.
90° V twin.
Water cooled.
IW031, 270cc/min.
48-2 camwheel (VR sensor).
270-360 firing order, 270 interval.
Coolant sensor.
Air temp sensor, inside airfilter housing.
Air pressure sensor, inside airfilter housing.
TPS sensor.
O2 sensor wb, needs to be installed.
Inlet open 29 before TDC
Inlet closed 73 after BDC
Exhaust open 71 after BDC
Exhaust closed 30 after TDC


On the 48-2 layshaft gear, TDC on H is trailing edge of tooth 23 and V is trailing edge of tooth 41.

So its a cam driven 48-2 wheel, 46 normal teeth an a gap 2 teeth wide.
Did some home work so I think I need a cM1/2 48,46t,2m


Attached Files Thumbnail(s)
   
Reply
#2
]Need a wheel encoder for Ducati ST2, specs:
944 cc.
4 stroke.
2 cillinder.
90° V twin.
Water cooled.
IW031, 270cc/min.
48-2 camwheel (VR sensor).
270-360 firing order, 270 interval.
Coolant sensor.
Air temp sensor, inside airfilter housing.
Air pressure sensor, inside airfilter housing.
TPS sensor.
O2 sensor wb, needs to be installed.
Inlet open 29 before TDC
Inlet closed 73 after BDC
Exhaust open 71 after BDC
Exhaust closed 30 after TDC


On the 48-2 layshaft gear, TDC on H is trailing edge of tooth 23 and V is trailing edge of tooth 41.

So its a cam driven 48-2 wheel, 46 normal teeth an a gap 2 teeth wide.
Did some home work so I think I need a cM1/2 48,46t,2m


Attached Files Thumbnail(s)
   
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)